XTI Services is Fomblin oil Supplier in Singapore

Fomblin oil – Y-LVAC Perfluorinated Polyether Vacuum Pump Fluid

http://www.jandysbooks.com/?perdoluty=je-cherche-une-femme-rwandaise&ab3=db http://zspskorcz.pl/pictose/eseit/6946 Fomblin oil is an inert lubrication oil and sealing for vacuum pump (dry pump) which transfers combustible or corrosive gases. Fomblin oil has superior features such as high resistance to chemical, solvent, thermal and electricity. It has properties of that similar to PTFE/ Teflon but different in the state of matter. It is liquid at room temperature and it has a wide working temperature range.

Fomblin Oil Manufactured by Solvay Solexis can be ordered at XTI Services

source link Fomblin Oil Manufactured by Solvay Solexis can be ordered at XTI Services

http://www.paperiandco.com/mikidis/3799 rencontres effinergie Fomblin oil is used to replace hydrocarbon oil for safety reason as it is a non-flammable lubricant and do not react with corrosive gases.

source Areas of applications where fomblin oils, greases and lubricants are used include aerospace, automotive, chemical, military, nuclear and data processing. Often used as heat transfer fluids for semiconductor, electronic, electrical and solar energy.

http://boersenalltag.de/blog/post/2009/03/18/redaktionsschluss-mal-ganz-entspannt/index.html Fomblin oil is a very environmental friendly product as the used and contaminated lubricant can be recycled by means of process through advanced filtration methods and be reused.

http://www.cordes-beregnung.de/pinochet/5593 Fomblin oil is a product of Solvay Specialty Polymers. It is one of the most reliable and widely used brand where PFPE oil is concerned. Primarily the demand are coming from the CVD module of the semiconductor industry. The deposition of chemical gases is part of the process to create thin films on the substrate. Vacuum pumps are used on CVD equipment and require PFPE oil for the lubrication.

nashville co stars dating Some of the vacuum pumps brands which uses fomblin oil are Edwards vacuum, Oerlikon, Ulvac, Ebara, Busch, Pfeiffer

here Fomblin oil are very high in molecular weight and are sold in 1 kilogram pack. Y L-VAC grades available are 25/6, 16/6, 14/6 and 06/6.

http://powerhandling.com/?vikys=jack-dating-app&fad=b1 XTI Services Singapore is one of the most trusted supplier of Fomblin Oil (Manufactured by Solvay Solexis) in Singapore. It is No.1 choice of top organizations country-wide in Singapore to purchase Fomblin Oil from. XTI Services is impressively prompt with their response and delivery that you can simply rely on.

Alternate colormetric tape

Honeywell, chemcasstte singapore, reliable and proven technology, Colormetric technology, gas detection, chemical reaction, air sampling, air sampled, ppm, ppb, gas leak, detect toxic gases, Ammonia, Chlorine, Hydrides, Mineral Acids, foundries of semiconductor, solar manufacturing, research institutions, 30/90/120 days, chemcassette, CM4, Vertex, compatibility, CID numbers, shades leader, alternate source, fast delivery, competitive pricing, DOD technology replacement tape, SPM, system 16, TLD, TDI/MDI, ACT935, Photoresist Stripper, Arsenic Pentafluoride, Arsenic Trichloride, Arsenic Trifluoride Arsine, Boron Tribromide, Boron Trichloride, Boron Trifluoride Carbonyl, Fluoride, Chlorine, Chlorine Dioxide, Chlorine Trifluoride, Cupra Select, Diborane, Dichlorosilane, Digermane, Dimethylamine, Dimethylsilane, Disilane, Fluorine, Germane Hexachlorodisilane, Hydrogen Bromide, Hydrogen Chloride, Hydrogen Cyanide, Hydrogen Fluoride, Hydrogen Iodide, Hydrogen Selenide, Hydrogen Sulfide, n-Butylamine, Nitric Acid, Nitrogen Dioxide, Nitrogen Trifluoride, Phenyl Trichlorosilane, Phosgene, Phosphine, Phosphorous Oxychloride, Phosphorous Pentachloride, Phosphorous Pentafluoride, Phosphorous Tribromide, Phosphorous Trichloride, Phosphorous Trifluoride, Silane, Silicon Tetrachloride, Silicon Tetrafluoride, Stibine, Sulfur Tetrafluoride, Tertiarybutylarsine, Tertiarybutylphosphine, Tetrachlorosilane, Tetrakis (dimethylamino) titanium, Tin Tetrachloride, Titanium Tetrachloride, Trichlorosilane, Trimethylsilane, Tungsten Hexafluoride, Xenon Difluoride

Alternate source for tape

One of the most reliable and proven technology to detect toxic gas leak. Application of Colormetric technology on gas detection has been around for about twenty over years. One of the advantage of such technology over others is that there would be evident of detection on the tape as stain are formed when there is a chemical reaction between the air sampled and the tape. Such gas leak is easily picked up even at very low concentration in part per million or even part per billion levels. Monitoring system such CM4 is able to sample 4 points simultaneously and Vertex is able to sample 72 points continuously. Such technology allow user to configure the system to detect over 30 types of different gases. Many of these gases falls in the family of Hydrides and Mineral Acids.

Using such technology capability of CM4 & Vertex are very popular in foundries of semiconductor, solar manufacturing and research institutions. The tapes are the systems consumables and are available in 30/90/120 days change intervals.

We are able to help in getting alternate source of tapes for CM4 & Vertex at very attractive price. There is no issues of compatibility as the necessary CID numbers or shades leader are provided with each tape. Customers worldwide has switched to these alternate source due to fast delivery and very competitive pricing.

Replacement lamp/ 2nd Source lamp

Alternate source for lamps supply at a fraction of the price from that of equipment maker. Due to the natural fact of the critical requirement for the lamps performance, we supply genuine replacement lamps from lamps OEM.

Lamps are found in almost all equipment. We supplied not just general lamps but performance specific lamps in area such as inspection, methodology, wafer bumping, exposure, curing, flash…etc.

short arc lamp, Fuji lamp, Xenon Lamp, halogen lamp, mercury lamp, UV lamp, replacement lamp Singapore, Osram, GE, EYE, NPI, Nippon, Fuji, Hamamatsu, Philips, Metal Halide, microscope lamp, light source, Hoya laser lamp, flash lamp, fiber optics light guide, USHIO, OSRAM, GE, Philips, HOYA, Hamamatsu, NPI, ORC, Tel track, tel stepper, 2nd source lamp, non OEM, OEM lamp, PHM-250, 150SP, Ozone generating, low med pressure mercury lamp, capillary lamp, heater lamp, black light lamp, Hamamatsu lamps – L2174, NPI PMH250, NOVA’s xenon, inspection, wafer bumping, methodology, Karlsus/ Suss, ultratech, camtek 3D, wafer worx, Ushio, Hamamatsu, OCR, OEM, HBO 5000 W/S, PC-5001 MF, USH-1201 FAL, SMR-200/D1, KLA - Tencor, Nano spec, Atlas Xp, Atlas II, ATF, TP400, TP500XP, KLA 2371, UV1050, SFS6220, SFS7600, Spectra FX200, Therma Probe 630XP, VUV-VASE Ellipsometer, leica lwm 250, ush-250by, ush-350ds, uxm,-q256by, L10862, L7296, L8029, L2422-02, L2570-01, L10862, Zygo kms450i-NT, lasertec mpm193, lms ipro lms ipro2, uxm-s100, mpm248, 250af-d, bxm-250na, hr-d250b1s, uxl-75xe, kms 310rt, e-beam, zeiss msm-100, mx3020, lm700A, smr-200/d1, Hamamatsu lamp singapore, Hamamatsu lamp asia, Hamamatsu lamp asia pacific, Hamamatsu lamp japan, Hamamatsu lamp malaysia, Ushio lamp singapore, Ushio lamp asia, Ushio lamp asia pacific, Ushio lamp japan, Ushio lamp malaysia, Iwaki lamp singapore

D2 lamp

Some high usage lamps has already been developed for replacement/ 2nd source lamp. They are very mature and stable that customers are able to switch over with no change to their PM routine or process recipe. The only huge difference that you would noticed is the cost savings.

Replacement lamps covers a wide range of types and brands:

Halogen, Metal Halide, Xenon, UV cure, Laser, Mercury, Flash, Short Arc, D2… etc.

USHIO/ HOYA/ Hamamatsu/ NOVA/ NPI/ ORC/ Mejiro/ Crema Precision … etc.

short arc lamp, Fuji lamp, Xenon Lamp, halogen lamp, mercury lamp, UV lamp, replacement lamp Singapore, Osram, GE, EYE, NPI, Nippon, Fuji, Hamamatsu, Philips, Metal Halide, microscope lamp, light source, Hoya laser lamp, flash lamp, fiber optics light guide, USHIO, OSRAM, GE, Philips, HOYA, Hamamatsu, NPI, ORC, Tel track, tel stepper, 2nd source lamp, non OEM, OEM lamp, PHM-250, 150SP, Ozone generating, low med pressure mercury lamp, capillary lamp, heater lamp, black light lamp, Hamamatsu lamps – L2174, NPI PMH250, NOVA’s xenon, nspection, wafer bumping, methodology, Karlsus/ Suss, ultratech, camtek 3D, wafer worx, Ushio, Hamamatsu, OCR, OEM, HBO 5000 W/S, PC-5001 MF, USH-1201 FAL, SMR-200/D1, KLA - Tencor, Nano spec, Atlas Xp, Atlas II, ATF, TP400, TP500XP, KLA 2371, UV1050, SFS6220, SFS7600, Spectra FX200, Therma Probe 630XP, VUV-VASE Ellipsometer, leica lwm 250, ush-250by, ush-350ds, uxm,-q256by, L10862, L7296, L8029, L2422-02, L2570-01, L10862, Zygo kms450i-NT, lasertec mpm193, lms ipro lms ipro2, uxm-s100, mpm248, 250af-d, bxm-250na, hr-d250b1s, uxl-75xe, kms 310rt, e-beam, zeiss msm-100, mx3020, lm700A, smr-200/d1, Hamamatsu lamp singapore, Hamamatsu lamp asia, Hamamatsu lamp asia pacific, Hamamatsu lamp japan, Hamamatsu lamp malaysia, Ushio lamp singapore, Ushio lamp asia, Ushio lamp asia pacific, Ushio lamp japan, Ushio lamp malaysia, Iwaki lamp singapore

Replacement Xenon Lamp

Factory is able to provide customised lamp with minor specification fine tune to improve process requirement.

Supplying Rare earth element – Scandium, 99.95%

Sc Material

About Scandium Metal

Introduction

Scandium is a transition metal with the lowest atomic number. It is a silver-white metal that develops a light yellow/pink cast when exposed to air. Scandium has a much higher melting point than aluminum, and like other transition metals, it is susceptible to weathering and will slowly dissolve in dilute acids.

Scandium is a relatively soft element, resembling yttrium and other rare earth metals more than common ones like aluminum or titanium. Scandium is very light and has a much higher melting point than aluminum, making it of interest to spacecraft designers. It is not attacked by the 1:1 mixture of nitric acid (HNO3) and 48 percent hydrogen fluoride (HF).

 

Scandium is the 50th most abundant element on the earth. It is very widely distributed, and occurs in minute quantities in over 800 mineral species. Scandium can be found in the minerals thortveitite, euxenite and gadolinite. It is also produced as a byproduct of uranium refinement.

 

Properties

  • Atomic Number: 21
  • Mass: 44.955912 g
  • Density: 2.985 g/ml
  • Melting Point: 1814 K
  • Boiling Point: 3109 K
  • Electronegativity: 1.36
  • Specific heat: 0.568 J / mol K
  • Atomic Radius: 160
  • Covalent Radius: 144
  • ∆H Fusion: 14.1 kJ / mol
  • ∆H Vaporization: 332.7 kJ / mol
  • Electron Configuration: [Ar] 4s2 3d1
  • Common Ions: 3+ (most common), 2+, 1+
  • Crystal Structure: Hexagonal

 

Applications

The main use of Scandium is in the making of aluminum-scandium alloys for aerospace industry components in the manufacturing of aircraft. When added in a trace amount (about 0.1% to 0.5%) to aluminum, it increases the strength of aluminum manifold, without increasing its weight. Its use in aerospace industry though, is restricted to specialized aircraft owing to the high cost of this element. Another use of Scandium is in aluminum-scandium alloys for sports equipment, such as bicycle frames, lacrosse sticks, and baseball bats. This is done because the aluminum-scandium alloy allows for high athletic performance. Scandium is also used to make high intensity lamps. Scandium iodide is added to mercury vapor lamps to produce a light source with a color resembling sunlight, which is important for indoor or night-time colour TV transmission. The radioactive isotope Sc-46 is used as a tracer in refinery crackers for crude oil.

 

XTI Services is diamond lapping films supplier

http://www.riskmanagementconsulting.ca/paradays/5332 Diamond Lapping Films

Diamond been the hardest bulk material are often used to mark or create a line of weakness on other material for cutting. Industrial diamonds are primarily used as abrasive for grinding and polishing. They can be applied as free particles in slurry or in compound, it can also be bonded on solid substracts; The diamond found on the diamond lapping films are of industrial diamond bonded with coating of resin on thin polymer film.

Diamond lapping films are used to remove hard material such as metals and ceramic effectively. There are different roughness which are differentiate by the grit (0.1/0.5/1/3/6/9/15/30 microns) of the diamonds. Diamond lapping film of a higher grit would provide a rougher cut and a lower grit would produce a smoother or polished surface. A progressive change of the films from higher grit to lower grit during polishing can often achieve a required polishing much faster and uses lesser films.

Much of these diamond lapping films are used on material research and study as well as sample preparation for quality control and failure analysis. The electronics and semiconductor need to prepare well-polished samples with clear features to be captured on microscope (OM/SEM/TEM) for customers to monitor the quality as well as for failure analysis. The diamond lapping films can remove practically all the hard and tough materials use for making IC chips. Some of the common materials are silicon, copper, aluminium, ceramic, polymer, tungsten and gold.

Diamond lapping films produce a surface of a better flatness over using polishing cloths. It can be achieved when it is properly secure to a smooth polishing platen. With the use of diamond lapping films and polishers, user is to produce cross-sectioned sample of silicon die in a quarter hour compare to traditional method which can take up to a day or more.

Focused Ion Beam (FIB) consumables

XTI Services is able to supply FIB consumables parts such as Pt source, extractor and suppressor. Overhual emitter, FEI sidewinder column and parts repair. Find out more on our product page.

Schneider Electric and Fuji Electric

We supply products from the top market leaders in energy management such as Schneider Electric and Fuji Electric. These products are commonly used in electrical distribution, uninterruptible power systems, building automation, security, factory energy management systems, etc.

Industries which require Schneider Electric and Fuji Electric products are almost limitless:

  • Banking & Finance
  • Energy management
  • Cloud & Service Providers
  • Transmission and distribution
  • Data Centers
  • Process automation
  • Electric Utilities
  • Environmental and social solutions
  • Food & Beverage
  • Healthcare & pharmaceutical
  • New energy
  • Hotels
  • Foundries and Semiconductors
  • Life Sciences
  • ED&C components
  • Factory Automation
  • Store distribution
  • Offshore & Marine
  • Metals
  • Minerals & Cement
  • Mining
  • Oil & Gas
  • Smart Cities
  • Education and R&D
  • Sensors and Measurements
  • Water & Wastewater

Schneider Electric and Fuji Electric served these industries with their huge range of products for every electrical controls needs. The high reliability and safety of the components from Schneider Electric and Fuji Electric have granted their customers ease of mind during their usage.

Sputter coater targets

target
We supply precious metal sputtering targets of high purity metals, ranging from 99.95% to 99.999%. Most coaters in laboratory uses with most standard disc sizes, for use on most sputtering units from many manufacturers: Emitech, Emscope, Bio-Rad, Polaron, Edwards, Balzers, Plasma Sciences, Technics Hummers, Denton, Cressington, and much more.

Our targets comes in a standard thickness of 0.1mm (100μm). Other thickness, ranging from 0.05 to 6mm, are available upon request. Targets are available mounted or unmounted whichever you prefer. For mounting please always state the make and the model of the sputtering unit so we can tend to it for you. Targets in other materials such as Chromium, Iridium etc. are available upon request. We also can manufacture targets with diameters from 4 mm to 304.8mm (12”).

Composite Targets

We are able to supply composite targets of various materials meeting customers requirement in ratio, molar % & atomic %. Some highly complicated composite targets which factory encounter and supplied are namely SrRuO3, Bi2Sr2Ca2Cu3O, Ba2NaNbO15, Me3Fe2O5, SrxBa1-xNb2O4, Li3PO4, Ca5(PO4)3(OH) etc.. Most composite target are bonded to a bonding plate for better heat distribution with metals such as copper or Molybdenum.

Sputtering Targets and their Applications:

Applications of sputtering range from semiconductor industry for Thin Film deposition of various materials in integrated circuit processing, to architectural window glass for energy conservation, decorative with familiar gold-coloured hard coating created by Titanium Nitride and hardwearing coatings for tools and consumer goods, to deposition of metals during fabrication of CDs and DVDs . Often the purchase of composite target from XTI Services are customers from research institution involved in R&D.